How to DIY a Beer+ Flights Tasting Tray

DIY your very own beer flights tasting tray. It’s so easy and the results are fantastic!

This is a sponsored post and contains affiliate links.

I’m not sure when it happened, but I became one of those gals who loves her plateware. I mean, what’s up with that? Dinner and dessert plates, platters, bowls and don’t get me started with serving trays…my heart’s all a flutter!

So, when it came time to create my next Kreg Tool project, which happened to coincide with my cousin, Tom’s birthday, I decided to combine my love of trays with his love of beer. Enter today’s how to: DIY a beer flights tasting tray…and a little som’sin-som’sin extra!

Low and behold, this beer flights tray can also be used for liqueur, nuts, hot sauces, candies or anything you wish to enjoy tasting and labeling for guests. With just a few supplies, including scrap wood you’ve been die’n to use, you can make a set of four in no time! Bottom’s up!

Supplies:

• (1) 1” x 6” x 6’. Common Board (or 1” x 6” x 5’ scrap wood)

• (1) ¼” x  3” x 48” decorative wood (we used Bolivian Rosewood)

• T-square or tape measure

(4-8) clamps

(1) Square-Cut

2″ forstner bit

P60 and P120 sand paper

painters tape

chalkboard paint

mini paint roller

wood glue

beeswax/mineral oil blend

self-adhesive bumpers

Tools:

jig saw or miter saw

hand sander

drill

drill press or drill guide

Cut list:

(4) ¼” x 3” x 12” (top pieces)

(4) 1” x 5½” x 12” (base pieces)

Instructions:

For FULL how-to instructions, including tips and photos, visit our Craft a Beer Flights Tasting Tray plan on today’s sponsor, Kreg’s buildsomething.com. 

Meanwhile…

Watch our DIY Beer+ Flights Tasting Tray VIDEO TUTORIAL:

[mv_video key=”irxvonuqpfyuluhtybjw” sticky volume=”70″ aspectRatio=”16:9″ title=”Craft a DIY Beer+ Flights Tasting Tray” thumbnail=”https://mediavine-res.cloudinary.com/video/upload/irxvonuqpfyuluhtybjw.jpg”]

I just love how elegant this flights tray turned out. Your tequila tasting guests will FLIP OVER how interactive this is!

If you’re not so into beer, you can use these trays for WINE! WINE NOT?

If you’re looking to host a HOT ONES CHALLENGE party, these trays are perfect! Keep it simple with four kinds, or line them up for 8, 12, or 16 sauces! Ouchie!

This post was sponsored by

We’ve teamed up with Kreg Tool to create this fun how-to for their buildsomething.com site. We also received compensation and a Kreg Tool product sample to use in this post and have included affiliate links to the tools and supplies I used in this project which helps fund these free posts and projects. My personal opinions are completely my own based on my experience. I wouldn’t have it any other way!